Head: Program_Generator configuration file V1.0 Sheet: DCC Test MLL_05 Line: Act // Set_LED_OutpPinLst(27 32 16 14 18 19 23 0) 0 0 Line: Act #ifdef ESP32{NewLine} #define USE_ESP32_EXTENSIONS{NewLine} #define USE_UI{NewLine}#endif 0 0 Line: Act SwitchD1 Schalter D1 T_FlipFlopReset(D1, #InCh, SI_0) 1 0 Line: Act SwitchD2 Schalter D2 T_FlipFlopReset(D2, #InCh, SI_0) 1 0 Line: Act SwitchD3 Schalter D3 T_FlipFlopReset(D3, #InCh, SI_0) 1 0 Line: Act Kanal 0 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 0-0 1 0 0 0 Line: Act Kanal 1 Heartbeat (deaktivieren bei PushButtons) RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 1-0 1 0 0 1 Line: Act Kanal 2 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 2-0 1 0 0 2 Line: Act Kanal 3 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 3-0 1 0 0 3 Line: Act Kanal 4 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 4-0 1 0 0 4 Line: Act Kanal 5 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 5-0 1 0 0 5 Line: Act Kanal 6 Heartbeat (deaktivieren bei DMX) RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 6-0 1 0 0 6 Line: - OnBoard-LEDs (nicht bei Verwendung der Status-LEDs) // Reserve LEDs(1) 1 0 0 7 Line: Act D1 Status-LED gelb Const(#LED, C1, #InCh, 9, 255) 7-0 C1-1 1 0 7 Line: Act D2 Status-LED weiß Const(#LED, C2, #InCh, 3, 90) 7-0 C2-2 1 0 7 Line: Act D3 Status-LED blau Const(#LED, C3, #InCh, 5, 180) 7-0 C3-3 1 0 7 Line: Act 1 MLL-Ring (pc) APatternT1(#LED,4,#InCh,36,0,10,0,0,600,137,98,8,162,28,195,52,142,34,72,162,24,130,40,199,48,141,163,40,146,40,134,32,202,49,76,227,56,138,36,138,33,136,114,12,211,52,142,34,137,98,8,162,28,195,48,141,163,72,162,24,130,40,199,49,76,227,40,146,40,134,32,202,114,12,211,56,138,36,138,33,136,162,28,195,52,142,34,137,98,8,130,40,199,48,141,163,72,162,24,134,32,202,49,76,227,40,146,40,138,33,136,114,12,211,56,138,36) 7-1 12 1 0 7 Line: Act Kanal 7 Heartbeat RGB_Heartbeat_Color(#LED, 5, 120, 150, 1 Sek) 7-13 1 0 0 7 Line: Act Kanal 0 Line: Act 1 Grün Verknüpfung der DCC-Adresse 1 mit dem Push Button B1 Logic(Test, #InCh OR SwitchB1) 1 0 Line: Act Test Aktivierung des Push Buttons B1 PushButton_RGB_0_1(#LED, #InCh, Test102_0, 0, 0, 1, 0, 30000, 10, 0, 0, 0, 127, 0, 0, 0, 0) 1-1 1 1 0 1 Line: - Line: Act 521 -1 12v Line: Act 50 AnAus RLS Gleis 1 exit 1-1 1 HouseT(#LED, #InCh, 1, 3, 2, 5, NEON_LIGHT2) 2-1 1 1 0 2 Line: Act // Next_LED(-1) 2-2 -1 0 0 2 Line: Act 93 AnAus RLS Gleis 2 2 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-1 1 1 0 2 Line: Act // Next_LED(-1) 2-2 -1 0 0 2 Line: Act 59 AnAus RLS Gleis 3 3 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-1 1 1 0 2 Line: Act 66 AnAus RLS Gleis 4 exit 1- 2 4 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-2 1 1 0 2 Line: Act // Next_LED(-1) 2-3 -1 0 0 2 Line: Act 60 AnAus RLS Gleis 5 5 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-2 1 1 0 2 Line: Act // Next_LED(-1) 2-3 -1 0 0 2 Line: Act 110 AnAus RLS Gleis 6 6 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-2 1 1 0 2 Line: Act 156 AnAus RLS Gleis 7 exit 1-3 7 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-3 1 1 0 2 Line: Act // Next_LED(-1) 2-4 -1 0 0 2 Line: Act 157 AnAus RLS Gleis 8 8 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-3 1 1 0 2 Line: Act // Next_LED(-1) 2-4 -1 0 0 2 Line: Act 248 AnAus RLS Gleis 52 9 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-3 1 1 0 2 Line: Act 181 AnAus RLS Gleis 10 exit 1-4 10 HouseT(#LED, #InCh, 1, 3, 2, 5, NEON_LIGHT2) 2-4 1 1 0 2 Line: Act // Next_LED(-1) 2-5 -1 0 0 2 Line: Act 158 AnAus RLS Gleis 9 11 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-4 1 1 0 2 Line: Act // Next_LED(-1) 2-5 -1 0 0 2 Line: Act 190 AnAus RLS Gleis 15 12 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-4 1 1 0 2 Line: Act 188 AnAus RLS Gleis 13 exit 1-5 13 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-5 1 1 0 2 Line: Act // Next_LED(-1) 2-6 -1 0 0 2 Line: Act 194 AnAus RLS Gleis 19 14 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-5 1 1 0 2 Line: Act // Next_LED(-1) 2-6 -1 0 0 2 Line: Act 186 AnAus RLS Gleis 11 15 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-5 1 1 0 2 Line: Act 192 AnAus RLS Gleis 17 exit 1-6 16 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-6 1 1 0 2 Line: Act // Next_LED(-1) 2-7 -1 0 0 2 Line: Act 198 AnAus RLS Gleis 23 17 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-6 1 1 0 2 Line: Act // Next_LED(-1) 2-7 -1 0 0 2 Line: Act 189 AnAus RLS Gleis 14 18 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-6 1 1 0 2 Line: Act 196 AnAus RLS Gleis 21 exit 1-7 19 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-7 1 1 0 2 Line: Act // Next_LED(-1) 2-8 -1 0 0 2 Line: Act 187 AnAus RLS Gleis 16 20 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-7 1 1 0 2 Line: Act // Next_LED(-1) 2-8 -1 0 0 2 Line: Act 191 AnAus RLS Gleis 12 21 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-7 1 1 0 2 Line: Act Exit 8 ist frei // Reserve LEDs(1) 2-8 1 0 0 2 Line: - Line: Act 246 AnAus RLS Gleis 39 exit 2-1 1 HouseT(#LED, #InCh, 1, 3, 2, 5, NEON_LIGHT2) 2-9 1 1 0 2 Line: Act // Next_LED(-1) 2-10 -1 0 0 2 Line: Act 250 AnAus RLS Gleis 46 2 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-9 1 1 0 2 Line: Act // Next_LED(-1) 2-10 -1 0 0 2 Line: Act 219 AnAus RLS Gleis 40 3 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-9 1 1 0 2 Line: Act 227 AnAus RLS Gleis 42 exit 2-2 4 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-10 1 1 0 2 Line: Act // Next_LED(-1) 2-11 -1 0 0 2 Line: Act 222 AnAus RLS Gleis 44 5 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-10 1 1 0 2 Line: Act // Next_LED(-1) 2-11 -1 0 0 2 Line: Act 243 AnAus RLS Gleis 50 6 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-10 1 1 0 2 Line: Act 217 AnAus RLS Gleis 38 exit 2-3 7 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-11 1 1 0 2 Line: Act // Next_LED(-1) 2-12 -1 0 0 2 Line: Act 215 AnAus RLS Gleis 26 8 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-11 1 1 0 2 Line: Act // Next_LED(-1) 2-12 -1 0 0 2 Line: Act 201 AnAus RLS Gleis 36 9 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-11 1 1 0 2 Line: Act 207 AnAus RLS Gleis 32 exit 2-4 10 HouseT(#LED, #InCh, 1, 3, 2, 5, NEON_LIGHT2) 2-12 1 1 0 2 Line: Act // Next_LED(-1) 2-13 -1 0 0 2 Line: Act 203 AnAus RLS Gleis 24 11 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-12 1 1 0 2 Line: Act // Next_LED(-1) 2-13 -1 0 0 2 Line: Act 259 AnAus RLS Gleis 37 12 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-12 1 1 0 2 Line: Act Exit 5 - 8 ist frei // Reserve LEDs(4) 2-13 4 0 0 2 Line: - Line: Act 259 AnAus RLS Gleis exit 3-1 1 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT1) 2-17 1 1 0 2 Line: Act // Next_LED(-1) 2-18 -1 0 0 2 Line: Act 260 AnAus RLS Gleis 2 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT2) 2-17 1 1 0 2 Line: Act // Next_LED(-1) 2-18 -1 0 0 2 Line: Act 261 AnAus RLS Gleis 3 HouseT(#LED, #InCh, 1, 1, 2, 5, NEON_LIGHT3) 2-17 1 1 0 2 Line: Act Exit 2 - 8 ist frei // Reserve LEDs(7) 2-18 7 0 0 2 Line: - Line: Act 521 -2 5V Line: Act 55 AnAus Exit-1 GiMaLampe 1 Exit 1-1 1 GasLights(#LED, #InCh, GAS_LIGHT2) 3-1 1 1 0 3 Line: Act // Next_LED(-1) 3-2 -1 0 0 3 Line: Act 62 AnAus Exit-1 GiMaLampe 2 Exit 1-2 2 GasLights(#LED, #InCh, GAS_LIGHT1) 3-1 1 1 0 3 Line: Act // Next_LED(-1) 3-2 -1 0 0 3 Line: Act 63 AnAus Exit-1 GiMaLampe 3 Exit 1-3 3 GasLights(#LED, #InCh, GAS_LIGHT3) 3-1 1 1 0 3 Line: Act 67 AnAus Exit-2 GiMaLampe 4 Exit 2-1 4 GasLights(#LED, #InCh, GAS_LIGHT2) 3-2 1 1 0 3 Line: Act // Next_LED(-1) 3-3 -1 0 0 3 Line: Act 69 AnAus Exit-2 GiMaLampe 5 Exit 2-2 5 GasLights(#LED, #InCh, GAS_LIGHT1) 3-2 1 1 0 3 Line: Act // Next_LED(-1) 3-3 -1 0 0 3 Line: Act 77 AnAus Exit-2 GiMaLampe 6 Exit 2-3 6 GasLights(#LED, #InCh, GAS_LIGHT3) 3-2 1 1 0 3 Line: Act 81 AnAus Exit-3 GiMaLampe 7 Exit 3-1 7 GasLights(#LED, #InCh, GAS_LIGHT2) 3-3 1 1 0 3 Line: Act // Next_LED(-1) 3-4 -1 0 0 3 Line: Act 83 AnAus Exit-3 GiMaLampe 8 Exit 3-2 8 GasLights(#LED, #InCh, GAS_LIGHT1) 3-3 1 1 0 3 Line: Act // Next_LED(-1) 3-4 -1 0 0 3 Line: Act 64 AnAus Exit-3 LokLeitung -aussen- Exit 3-3 9 GasLights(#LED, #InCh, GAS_LIGHT3) 3-3 1 1 0 3 Line: Act 86 AnAus Exit-4 LokLeitung - innen- Exit 4-1 10 GasLights(#LED, #InCh, GAS_LIGHT2) 3-4 1 1 0 3 Line: Act // Next_LED(-1) 3-5 -1 0 0 3 Line: Act 65 AnAus Exit-4 RLS aussen 1 Exit 4-2 11 GasLights(#LED, #InCh, GAS_LIGHT1) 3-4 1 1 0 3 Line: Act // Next_LED(-1) 3-5 -1 0 0 3 Line: Act 110 AnAus Exit-4 RLS aussen 2 Exit 4-3 12 GasLights(#LED, #InCh, GAS_LIGHT3) 3-4 1 1 0 3 Line: Act 60 AnAus Exit-5 RLS aussen Exit 5-1 13 GasLights(#LED, #InCh, GAS_LIGHT2) 3-5 1 1 0 3 Line: Act // Next_LED(-1) 3-6 -1 0 0 3 Line: Act 156 AnAus Exit-5 RLS aussen Exit 5-2 14 GasLights(#LED, #InCh, GAS_LIGHT1) 3-5 1 1 0 3 Line: Act // Next_LED(-1) 3-6 -1 0 0 3 Line: Act Exit 5-3 15 GasLights(#LED, #InCh, GAS_LIGHT3) 3-5 1 1 0 3 Line: Act Exit 6 16 1 Line: - Line: Act Exit-6 bis Exit-8 sind frei ESP Out 3 // Reserve LEDs(2) 3-6 2 0 0 3 Line: - Line: - Kanal 1 Line: - Belebtes Haus Line: Act Kanal 2 Line: - Belebtes Haus Line: Act Kanal 0N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 0-1 1 0 0 0 Line: Act Kanal 1N Heartbeat Rückmeldung (deaktivieren Buttons) RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 1-2 1 0 0 1 Line: Act Kanal 2N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 2-25 1 0 0 2 Line: Act Kanal 3N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 3-8 1 0 0 3 Line: Act Kanal 4N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 4-1 1 0 0 4 Line: Act Kanal 5N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 5-1 1 0 0 5 Line: Act Kanal 6N Heartbeat Rückmeldung (deaktivieren DMX) RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 6-1 1 0 0 6 Line: Act Kanal 7N Heartbeat Rückmeldung RGB_Heartbeat_Color(#LED, 5, 120, 205, 1 Sek) 7-14 1 0 0 7